Chain Lubricant Spray

Chain Lubricant Spray: A Practical Guide for Daily Commuters

A motorcycle or scooter is the perfect transportation option for city commuters or those who need to navigate the daily grind of traffic, dust and weather. These conditions can be progressive, causing problems to develop in the drivetrain, especially in the motorcycle chain. Regular maintenance helps to ensure that the chain runs smoothly, minimizes unnecessary wear. A properly selected chain lubricant spray is a simple part of a rider’s maintenance that they should use.

Why Daily Commuters Need Chain Lubrication

Motorcycle chains are subject to dirt, mud and dust on the road during frequent riding. If insufficient lubrication is provided, moving components can rub against each other, which can lead to chain and sprocket wear. Unusual noise or rough movement of the chain may also be seen by the riders.

Application of a proper chain lubricant spray will decrease wearing of moving parts and prevent moisture and corrosion. Properly cleaned, adjusted and lubricated, a drive train is likely to perform reliably.

Selecting the proper Chain Lubricant Spray

Not all grease or oil fits all motorcycles or circumstances. When selecting a product, keep the following things in mind:

Chain Type Compatibility: Ensure that the lubricant is compatible with your motorcycle’s type of chain, whether it is an O-ring or X-ring chain.

Riding conditions: Rain, dust and road grime can have an impact on the lubricant that is needed.

Adhesion: A good formulation should stick to chain as intended, and reduce spurting when riding.

Manufacturer recommendations: Read the motorcycle manual and instructions for use before application.

Routine maintenance will enhance rather than detract from chain performance if you select a product which is compatible.

Correct Application of Chain Lubricant Spray

Applying the correct product can be very important. The following simple steps will help keep your motorbike chain in good condition.

Clean your chain with a suitable chain cleaner to remove built up grime and old oil.

  1. Secure your motorbike: Make sure the engine is turned off and the bike is secured before carrying out any work. Never run your engine whilst applying the lubricant.
  2. Apply the lubricant carefully: Follow the manufacturers instructions and apply the product to the moving joints and rollers of you chain. Don’t over apply.
  3. Leave it for long enough: Leave the chain for the recommended amount of time to allow the oil to settle. Wipe off any excess if required.

Avoid these common lubrication mistakes

Lubricating a dirty chain can actually help to hold particles in place and decrease maintenance effectiveness. Excessive spray use can draw in other dirt or lubricant can be deposited on adjacent components.

Also, riders should refrain from using oils or cleaners that are not meant for that type of bike, failing to adjust chain tension and ignoring damage. Worn sprockets, broken links or bad chain adjustment can’t be fixed with lubrication.

Make Chain Care a Part of Your Daily Riding Routine

Regular car care is essential when it comes to everyday commuting. Regularly check the chain for wear and according to the motorcycle manufacturer’s cleaning, lubrication and adjustment schedule. Heavy rain or dusty conditions may mean more frequent attention is needed while riding.

Kangaroo Autocare is a supplier of Automotive Care Products to regular vehicle maintenance. Using appropriate motorcycle chain care products and proper application procedures, everyday riders can help ensure their motorcycle chains last a long time, and their vehicles are prepared for daily riding.

Leave a Reply

Your email address will not be published. Required fields are marked *