Blog
Dirty Chain, Poor Performance? Why Chain Lube and Cleaner Matter
A motorcycle chain plays an important role in transferring power from the engine to the rear wheel. It is, however, subject to dust, dirt from the road and moisture and dirt from old lubes during regular use. This accumulation can impact the operation of the chain and cause it to wear out more quickly over time. During regular maintenance, the proper use of the chain lube and cleaner will keep the drivetrain clean, lubricated and efficient.
Understanding the impact of a Dirty Chain on a Motorcycle
A dirty and greasy chain will not run as easily as a clean one. Debris can cause chain and sprocket wear and poor lubrication can introduce friction between moving parts.
Riders might also experience a strange noise, an abnormal vibration or may see rust. The following are the signs that the chain requires inspection and maintenance. Failure to act might cause early wear and tear on parts and costly repairs.
What is the purpose of Chain Cleaner?
Chain lube and cleaner works to lubricate the chain and remove any accumulated dirt, grease and old lubricant. The reason of cleaning before adding new oil is to avoid excessive dirt mixing with the new oil.
To clean effectively, do the following:
- Secure and let hot parts cool off.
- Use appropriate chain cleaner, as directed by the product label.
- Use an appropriate chain brush to remove stubborn deposits.
- Clean off any loose dirt and dry the chain as indicated.
- Always use a cleaner appropriate for the type of chain on your motorcycle and according to the manufacturer’s maintenance suggestions.
How Chain Lube Protects Your Bike Chain
Lubricant for chains helps to minimize wear between moving parts and helps prevent moisture and corrosion after the chain is cleaned. Additionally, good lubrication provides smoother operation of the chain and reduces chain and sprocket wear.
Use lubricant according to the instructions of the product manufacturer, keeping in mind the chain’s moving joints and the rollers. Don’t over lubricate; if too much is applied it can suck up dirt or may be thrown on nearby surfaces while riding.
When to clean and lubricate the chain?
No single maintenance interval is right for all motorcycles. The frequency of chain maintenance depends on riding frequency, weather conditions, road conditions and manufacturer recommendations.
If the frequency of riding in rain, mud at road, or dusty environment is increased, the cleaning and lubrication frequency may be increased. Check the chain for excessive slack, stiff links, rust or abnormal wear on the chain. No cleaning and lubrication can replace the need for the chain to be adjusted or replaced.
Select the right chain lube and cleaner that is suitable for regular maintenance.
Choosing the right products is of great importance in the care of the motorcycles. If you have a motorcycle with an O-ring, X-ring or Z-ring chain, be sure to verify compatibility. Use cleaning and lubes as per the motorcycle manufacturer’s recommendations.
Kangaroo Autocare supplies chain maintenance products: Chain cleaner, chain lubricant, chain care kits (with chain cleaning brushes). These products offer the rider the choice to incorporate chain cleaning and lubrication into the regular maintenance schedule.
Visit the Kangaroo Autocare chain lubricant product range of chain lube and cleaner to discover appropriate chain care products for your bike.
It only takes a little time to maintain regularly and can help prevent the loss of vital parts of the drivetrain. Riders can maintain their chains in a cleaner, properly lubricated state and ready for use for everyday riding with the right chain lube and cleaner.